UBIK Wiki Test / Augmensys - User contributions [en]

HowTo:Create a new ReferenceViewItem automatically

2024-04-15T11:30:10Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

A window will appear where you can choose between existing link properties which will fit and you want to use as reference for the [[REFERENCEVIEWITEM|ReferenceViewItem]]. You can select one by clicking on its Radiobutton (you can only select one item) then confirm your choice with "OK". If there is no link property you want to use, you can select "Create new link property" and a new link property will be created automatically as CUSTOMMETAPROPERTY with a REFERENCE to the drop target MetaClass.
If you do not want to use any property you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:SingleselectionWindow1.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:MultipleselectionWindow.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]
[[Category:Studio controls|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-04-15T07:31:05Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

A window will appear where you can choose between existing link properties which will fit and you want to use as reference for the [[REFERENCEVIEWITEM|ReferenceViewItem]]. You can select one by clicking on its Radiobutton (you can only select one item) then confirm your choice with "OK". If there is no link property you want to use, you can select "Create new link property" and a new link property will be created automatically as CUSTOMMETAPROPERTY with a REFERENCE to the dragged MetaClass.
If you do not want to use any property you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:SingleselectionWindow1.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:MultipleselectionWindow.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]
[[Category:Studio controls|Create a new ReferenceViewItem automatically]]

File:SingleselectionWindow1.png

2024-04-15T07:30:53Z

EMM: File uploaded with MsUpload

File uploaded with MsUpload

File:SingleselectionWindow.png

2024-04-15T07:28:18Z

EMM: EMM uploaded a new version of File:SingleselectionWindow.png

File uploaded with MsUpload

File:SingleselectionWindow.png

2024-04-15T07:27:42Z

EMM: EMM uploaded a new version of File:SingleselectionWindow.png

File uploaded with MsUpload

File:SingleselectionWindow.png

2024-04-15T07:27:13Z

EMM: EMM uploaded a new version of File:SingleselectionWindow.png

File uploaded with MsUpload

File:SingleselectionWindow.png

2024-04-15T07:23:34Z

EMM: EMM uploaded a new version of File:SingleselectionWindow.png

File uploaded with MsUpload

HowTo:Create a new ReferenceViewItem automatically

2024-04-15T07:19:14Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

A window will appear where you can choose between existing link properties which will fit and you want to use as reference for the [[REFERENCEVIEWITEM|ReferenceViewItem]]. You can select one by clicking on its Radiobutton (you can only select one item) then confirm your choice with "OK". If there is no link property you want to use, you can select "Create new link property" and a new link property will be created automatically as CUSTOMMETAPROPERTY with a REFERENCE to the dragged MetaClass.
If you do not want to use any property you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:SingleselectionWindow.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:MultipleselectionWindow.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]
[[Category:Studio controls|Create a new ReferenceViewItem automatically]]

File:SingleselectionWindow.png

2024-04-15T07:14:21Z

EMM: EMM uploaded a new version of File:SingleselectionWindow.png

File uploaded with MsUpload

HowTo:Create a new View

2024-04-02T06:58:40Z

EMM:

To display objects in a hierarchical manner a [[View]] and its related [[VIEWITEMS|ViewItem's]] ([[QUERYVIEWITEM]], [[REFERENCEVIEWITEM]] and [[RELATIONVIEWITEM]]) are evaluated.
A View must also obtain a set of root objects displayed on the first hierarchy level.

== Creating the View instance ==
# Navigate to the MetaClass ''View'' via the ''[[Class Browser]]'' [[File:UI_view_01.png|220 px|border|alt=View|View]]
# Create a new instance using the ''[[Bulk Editor]]'' [[File:UI_view_02.png|880 px|border|alt=View|View]]
# Set at least name and description

== Configuring the View ==
[[File:UI_view_03.png|330 px|border|alt=View|View]]
=== Defining root objects ===
# Relate single root objects via {{Rel|SYSREL_VIEWROOT|SYSREL_VIEWROOT}} or a query fetching a list of objects via {{Rel|SYSREL_VIEWROOTQUERY|SYSREL_VIEWROOTQUERY}}

=== Defining hierarchy levels ===
# Relate a set of ViewItems to the View via {{Rel|SYSREL_VIEW|SYSREL_VIEW}}

== Testing the View ==
# Save all changes with {{key press|Ctrl|S}} or the save command
# Test the view in the [[View Test Environment]].

==See also==
* [[HowTo:Use a Query in a View]]
* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new ReferenceViewItem automatically]]

[[Category:How-To|Create a new View]]

HowTo:Create a new ViewItem

2024-04-02T06:58:02Z

EMM:

__NOTOC__
There are three different ''ViewItems'' in the namespace ''Custom.View.Items'' via the ''[[Class Browser]]'' [[File:UI viewitem 01.PNG|thumb|330 px|border|alt=ViewItem|ViewItem]]

==ReferenceViewItem==
Use this to evaluate hierarchy informations between objects using [[REFERENCE|references]]:
# Create a new instance of a '''[[REFERENCEVIEWITEM|ReferenceViewItem]]''' using the ''[[Bulk Editor]]'' [[File:UI viewitem 03.PNG|990 px|border|alt=View|View]]
# Set the name of the reference property in the '''REFERENCE''' cell
# Set the '''REVERSE''' checkbox if the ''ReferenceViewItem'' should be evaluated from right to left instead of left to right
# Assign a query instance of the ''ReferenceViewItem'' to the '''REVERSEREFTYPE''' attribute either by
#* dragging and dropping a metaclass object onto the cell
#* selecting the desired MetaClass from the dialog appearing after double-clicking the cell

== RelationViewItem ==
Use this to evaluate hierarchy informations between objects using [[RELATION|relations]]:
# Create a new instance of a '''[[RELATIONVIEWITEM|RelationViewItem]]''' using the ''[[Bulk Editor]]'' [[File:UI viewitem 04.PNG|990 px|border|alt=View|View]]
# Set the '''REVERSE''' checkbox if the ''RelationViewItem'' should be evaluated from right to left instead of left to right
# Assign a query instance of the ''RelationViewItem'' to the '''RELATION''' attribute either by
#* dragging and dropping a relation object onto the cell
#* selecting the desired Relation from the dialog appearing after double-clicking the cell

== QueryViewItem ==
Use this to place a query within a view:
# Create a new instance of a '''[[QUERYVIEWITEM|QueryViewItem]]''' using the ''[[Bulk Editor]]'' [[File:UI viewitem 02.PNG|880 px|border|alt=View|View]]
# Assign a query instance of the ''QueryViewItem'' to the '''QUERY''' attribute either by
#* Drag and drop a query object onto the cell
#* Select the desired Query from the dialog appearing after double-clicking the cell

== For all ViewItems ==
# Set at least name and description
# The required ViewItem's must be added to the view with the ''[[Relation Editor]]''. [[File:UI_view_03.png|330 px|border|alt=View|View]]
# Save the changes with {{key press|Ctrl|S}} or the save command

==See also==
* [[HowTo:Create a new View]]
* [[HowTo:Create a new ReferenceViewItem automatically]]

[[Category:How-To|Create a new ViewItem]]

HowTo:Create a new ReferenceViewItem automatically

2024-04-02T06:57:35Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on its Radiobutton (you can only select one item) then confirm your choice with "OK". If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:SingleselectionWindow.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:MultipleselectionWindow.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]
[[Category:Studio controls|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-04-02T06:56:26Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on its Radiobutton then confirm your choice with "OK". If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:SingleselectionWindow.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:MultipleselectionWindow.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]
[[Category:Studio controls|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-04-02T06:55:55Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on its Radiobutton and confirm your choice with "OK". If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:SingleselectionWindow.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:MultipleselectionWindow.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]
[[Category:Studio controls|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-04-02T06:52:59Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:SingleselectionWindow.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:MultipleselectionWindow.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]
[[Category:Studio controls|Create a new ReferenceViewItem automatically]]

File:MultipleselectionWindow.png

2024-04-02T06:52:32Z

EMM: File uploaded with MsUpload

File uploaded with MsUpload

File:SingleselectionWindow.png

2024-04-02T06:51:59Z

EMM: File uploaded with MsUpload

File uploaded with MsUpload

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:27:02Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:24:21Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:How-To|Create a new ReferenceViewItem automatically]]
[[Category:Studio|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:22:47Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]
* [[Drag and Drop Actions]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:21:06Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new [[REFERENCEVIEWITEM|ReferenceViewItems]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:20:36Z

EMM: /* Link property selection */

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of a new [[REFERENCEVIEWITEM|ReferenceViewItem]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:18:59Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of a new [[REFERENCEVIEWITEM|ReferenceViewItem]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:16:58Z

EMM: /* View selection */

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of a new [[REFERENCEVIEWITEM|ReferenceViewItem]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

== View selection ==

After that a second Window will appear where you can choose multiple existing [[VIEW|Views]] to which you want to add the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] by checking them and confirming with the "OK" button. If you do not want to add the [[REFERENCEVIEWITEM|ReferenceViewItem]] to a [[VIEW|View]], you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a [[REFERENCEVIEWITEM|ReferenceViewItem]] is created and added to the [[VIEW|Views]] automatically. The changes are saved automatically.

{{Template:HowTo/End}}

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:14:39Z

EMM: /* Link property selection */

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of a new [[REFERENCEVIEWITEM|ReferenceViewItem]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created [[REFERENCEVIEWITEM|ReferenceViewItem]] manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the [[REFERENCEVIEWITEM|ReferenceViewItem]] will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

== View selection ==

After that a second Window will appear where you can choose multiple existing Views to which you want to add the just created Reference ViewItem by checking them and confirming with the OK button. If you do not want to add the Reference ViewItem to a View, you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a Reference ViewItem is created and added to the Views automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:12:07Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of a new [[REFERENCEVIEWITEM|ReferenceViewItem]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a [[REFERENCEVIEWITEM|ReferenceViewItem]] by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created ReferenceViewItem manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the Reference ViewItem will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing Views to which you want to add the just created Reference ViewItem by checking them and confirming with the OK button. If you do not want to add the Reference ViewItem to a View, you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a Reference ViewItem is created and added to the Views automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:11:18Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of a new [[REFERENCEVIEWITEM|ReferenceViewItem]].

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a Reference ViewItem by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created ReferenceViewItem manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the Reference ViewItem will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing Views to which you want to add the just created Reference ViewItem by checking them and confirming with the OK button. If you do not want to add the Reference ViewItem to a View, you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a Reference ViewItem is created and added to the Views automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:04:37Z

EMM:

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new reference view items.

{{Template:HowTo/Begin}}

= Instructions =

== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a Reference ViewItem by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created ReferenceViewItem manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the Reference ViewItem will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing Views to which you want to add the just created Reference ViewItem by checking them and confirming with the OK button. If you do not want to add the Reference ViewItem to a View, you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a Reference ViewItem is created and added to the Views automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:Actions|Create a new ReferenceViewItem automatically]]
[[Category:How-To|Create a new ReferenceViewItem automatically]]

HowTo:Create a new ReferenceViewItem automatically

2024-03-19T08:04:12Z

EMM: Created page with "{{Version/ServerSince|4.8}} One of the Drag and Drop Actions in UBIK 4.8 and above is the automatic creation of new reference view items. {{Te..."

User:EMM

2024-03-19T07:55:13Z

EMM: Blanked the page

User:EMM

2024-03-19T07:45:07Z

EMM: Created page with "{{Version/ServerSince|4.8}} One of the Drag and Drop Actions in UBIK 4.8 and above is the automatic creation of new reference view items. {{Te..."

{{Version/ServerSince|4.8}} One of the [[Drag and Drop Actions]] in UBIK 4.8 and above is the automatic creation of new reference view items.

{{Template:HowTo/Begin}}

= Instructions =


== Trigger ==

It can be triggered by dragging the designated child MetaClass onto the designated parent MetaClass. Confirm your decision to create a Reference ViewItem by clicking on the upcoming context menu item “Create Reference View Item and add it to a View”.

[[File:DragDropViewItem.png]]

== Link property selection ==

There are three possible outcomes for the choice of the link property:
# If there does not exist any fitting reference link property on the dragged MetaClass you will get a warning message that you will have to create one and enter its name into the “Reference” property of the just created ReferenceViewItem manually.
# If there already is a fitting link property on the dragged MetaClass, this one will be used automatically.
# If more than one fitting link property exist, you will be asked which one you want to use as reference. You can select one by clicking on it. If you do not want to use one of these properties you can just close the window and the Reference property of the Reference ViewItem will be left empty.

[[File:DragDropViewItemPropertySelection.png]]

== View selection ==

After that a second Window will appear where you can choose multiple existing Views to which you want to add the just created Reference ViewItem by checking them and confirming with the OK button. If you do not want to add the Reference ViewItem to a View, you can just close the window.

[[File:DragDropViewItemViewSelection.png]]

The process is done and a Reference ViewItem is created and added to the Views automatically. The changes are saved automatically.

{{Template:HowTo/End}}

==See also==

* [[HowTo:Create a new ViewItem]]
* [[HowTo:Create a new View]]

[[Category:How-To]]

File:DragDropViewItemViewSelection.png

2024-03-19T07:30:30Z

EMM: File uploaded with MsUpload

File uploaded with MsUpload

File:DragDropViewItem.png

2024-03-19T07:30:29Z

EMM: File uploaded with MsUpload

File uploaded with MsUpload

File:DragDropViewItemPropertySelection.png

2024-03-19T07:30:29Z

EMM: File uploaded with MsUpload

File uploaded with MsUpload